Allied Automation, Inc.

Moxa’s EDR Series industrial secure routers protect the control networks of critical facilities while maintaining fast data transmission. They are specifically designed for automation networks, and are integrated cybersecurity solutions that combine an industrial firewall, VPN, router, and L2 switching functions into a single product that protects the integrity of remote access and critical devices.

 

Moxa EDR-810 Series

8+2G multiport industrial secure router with switch/firewall/NAT/VPN.

  • 8+2G all-in-one firewall/NAT/VPN/router/switch
  • Build up secure remote access tunnel with VPN
  • Protect critical assets by stateful firewall
  • Inspect industrial protocol with PacketGuard technology
  • Easy network setup with network address translation (NAT)
  • RSTP/Turbo Ring redundant protocol enhances network redundancy
  • -40 to 75°C operating temperature range (T model)
  • ISA99 / IEC 62443 / NERC CIP compliance
  • Check firewall settings with intelligent SettingCheck feature

Moxa EDR-G902 Series

Industrial secure routers with Firewall/NAT/VPN.

  • Firewall/NAT/VPN/Router all-in-one
  • Secure remote access tunnel with VPN
  • Protect critical assets with stateful firewall
  • Inspect industrial protocol with PacketGuard technology
  • Easy network setup with address translation (NAT)
  • Dual WAN redundant interfaces through public networks
  • Support for VLANs in different interfaces
  • -40 to 75°C operating temperature range (T model)
  • ISA99 / IEC 62443 / NERC CIP compliance

 Moxa EDR-G903 Series

Industrial secure routers with Firewall/NAT/VPN.

  • Firewall/NAT/VPN/Router all-in-one
  • Secure remote access tunnel with VPN
  • Protect critical assets with stateful firewall
  • Inspect industrial protocol with PacketGuard technology
  • Easy network setup with address translation (NAT)
  • Dual WAN redundant interfaces through public networks
  • Support for VLANs in different interfaces
  • -40 to 75°C operating temperature range (T model)
  • ISA99 / IEC 62443 / NERC CIP compliance

 

TN-5900 Series

EN 50155 16-port NAT router

The ToughNet TN-5900 Series, designed for rolling stock backbone networks, are high-performance M12 routers with four bypass relay backbone ports. They support NAT and routing functionality to facilitate the deployment of applications across networks. The TN-5900 Series routers use M12 and other circular connectors to ensure tight, robust connections that guarantee reliability against environmental disturbances, such as vibration and shock.

The TN-5900 Series routers provide a wide power input range of 24 to 110 VDC. TN-5900 Series switches operate in an extended operating temperature range of -40 to 75°C and are compliant with the mandatory requirements of EN 50155/50121-4, making them suitable for a variety of industrial applications.

Additional Features and Benefits

  • Routing functionality to divide a large network into hierarchical subnets and allow data and information to communicate across networks

  • NAT makes IP management easier, since end devices in different carriages can use the same IP addresses

  • Leading EN 50155 Ethernet router for rolling stock applications

  • Turbo Ring and RSTP/STP for network redundancy

  • IGMP V1/V2 snooping for filtering multicast traffic

  • IEEE 802.1Q VLAN to ease network planning

  • QoS (IEEE 802.1p/1Q and TOS/DiffServ) to improve reliability

  • Panel mounting or DIN-rail mounting installation capability

  • SNMPv3, HTTPS, and SSH to enhance network security

  • SNMP v1/v2c/v3 for different levels of network management

  • Port mirroring for online debugging

  • Automatic warning by exception through email and relay output

  • Line-swap fast recovery

  • Automatic recovery of connected device’s IP addresses

  • LLDP for automatic topology discovery in network management software

  • Configurable by web browser, Telnet/serial console, and CLI Windows utility

 

 

Call us at 800-214-0322 for more information about our Moxa Solutions.